Package: amd Version: upl102-23.slink2 Maintainer: Roman Hodek Depends: libc6, libgdbmg1, netstd Suggests: nis Architecture: i386 Filename: dists/slink/updates/binary-i386/amd_upl102-23.slink2_i386.deb Size: 394254 MD5sum: c732a6033245daf368fc1cf77718113e Description: The 4.4BSD automounter. Amd is an automounter--it mounts file systems "on demand" when they are first referenced and unmounts them after a period of inactivity. installed-size: 539 Package: apcd Version: 0.6a.nr-4slink1 Maintainer: Tibor Koleszar Depends: libc6 Conflicts: ups-monitor Provides: ups-monitor Architecture: i386 Filename: dists/slink/updates/binary-i386/apcd_0.6a.nr-4slink1_i386.deb Size: 18868 MD5sum: cff51852635922507c37f96df99d8e76 Description: APC Smart UPS daemon This daemon monitors an APC UPS either as master, with the serial cable attached to it, or as a slave, with a network connection to the master. . The daemon constantly gathers information from the UPS (battery load, Temperature, workload, etc.) and logs them to a file. It shuts down the system cleanly after a certain period of constant power failure or if the battery load falls below a certain level. installed-size: 58 Package: bind Version: 1:8.2.2p5-0slink1 Priority: extra Section: net Maintainer: Bdale Garbee Depends: libc6, netbase Recommends: dnsutils Suggests: bind-doc Replaces: netstd (<<2.00) Architecture: i386 Filename: dists/slink/updates/binary-i386/bind_8.2.2p5-0slink1_i386.deb Size: 562118 MD5sum: f25811f6d69034ea64c65382e6c9717d Description: An Internet domain name server The Berkeley Internet Name Domain (BIND) implements an Internet name server for Unix operating systems. The BIND consists of a server (or `daemon') called `named' and a resolver library. A name server is a network service that enables clients to name resources or objects and share this information with other objects in the network. This in effect is a distributed data base system for objects in a computer network. The BIND server runs in the background, servicing queries on a well known network port. installed-size: 4986 Package: c-client-dev Version: 4.5-0slink3 Priority: standard Section: devel Maintainer: Jaldhar H. Vyas Architecture: i386 Filename: dists/slink/updates/binary-i386/c-client-dev_4.5-0slink3_i386.deb Size: 738508 MD5sum: 21bfffe62407aac1885b52e2dc797ce9 Description: UW c-client library for mail protocols This package contains the static c-client.a and headers for using the c-client mail handling library. source: imap installed-size: 1980 Package: canna Version: 3.5b2-24slink1 Priority: optional Section: utils Maintainer: ISHIKAWA Mutsumi Depends: libc6, libcanna1g Conflicts: canna-server Replaces: canna-server Architecture: i386 Filename: dists/slink/updates/binary-i386/canna_3.5b2-24slink1_i386.deb Size: 832910 MD5sum: c15a54507be2fc745d55718efbae4f74 Description: A japanese input system (server and dictionary). Canna is a Japanese input system available in Free Software. Canna provides a unified user interface for inputing Japanese. . Canna supports Nemacs(Mule), kinput2 and canuum. All of these tools can be used by a single customization file, romaji-to-kana conversion rules and conversion dictionaries, and input Japanese in the same way. . Canna converts kana to kanji based on a client-server model and supports automatic kana-to-kanji conversion. . This package includes cannaserver program and dictionary files. installed-size: 1380 Package: canna-utils Version: 3.5b2-24slink1 Priority: optional Section: utils Maintainer: ISHIKAWA Mutsumi Depends: libc6, libcanna1g Architecture: i386 Filename: dists/slink/updates/binary-i386/canna-utils_3.5b2-24slink1_i386.deb Size: 104062 MD5sum: 45705fd8a8d230d3dd0094707eb2fac3 Description: A japanese input system (utility). Canna is a Japanese input system available in Free Software. This package includes canna client programs. source: canna installed-size: 170 Package: cfingerd Version: 1.3.2-18.1 Maintainer: Martin Schulze Depends: libc6, netbase (>=2.00) Architecture: i386 Filename: dists/slink/updates/binary-i386/cfingerd_1.3.2-18.1_i386.deb Size: 67030 MD5sum: 515bdcc9e579ce8b886341658bacaefd Description: Configurable and secure finger daemon This is a free and secure finger daemon replacement for standard finger daemons such as GNU fingerd, or MIT fingerd. Cfingerd can enable/disable finger service to individual users, rather than to all users on a given host. Cfingerd is able to respond to a finger request to a specified user by running a shell script (e.g., finger doorbell@mysite.mydomain might cause a sound file to be sent) rather than just a plain text file. installed-size: 131 Package: cron Version: 3.0pl1-50.2 Priority: important Section: admin Maintainer: Steve Greenland Depends: libc6, bsdutils, debianutils (>=1.7) Recommends: smail | sendmail | mail-transport-agent Suggests: anacron (>=2.0-1) Architecture: i386 Filename: dists/slink/updates/binary-i386/cron_3.0pl1-50.2_i386.deb Size: 46834 MD5sum: 85d9ffff103d0121101b7b80817d0abe Description: management of regular background processing cron is a background process (`daemon') that runs programs at regular intervals (for example, every minute, day, week or month); which processes are run and at what times are specified in the `crontab'. . Users may also install crontabs so that processes are run on their behalf, though this feature can be disabled or restricted to particular users. . Output from the commands is usually mailed to the system administrator (or to the user in question); you should probably install a mail system as well so that you can receive these messages. . This cron package is configured by default to do various standard system maintenance tasks, such as ensuring that logfiles do not grow endlessly and overflow the disk. installed-size: 114 Package: cvsweb Version: 2:109 Priority: extra Section: devel Maintainer: Karl M. Hegbloom Depends: httpd, perl, cvs Architecture: all Filename: dists/slink/updates/binary-i386/cvsweb_109_all.deb Size: 27316 MD5sum: fe9144254ab224923ac627aef7ec2167 Description: A CGI interface to your CVS repository. `cvsweb' is a WWW CGI script that provides remote access to your CVS repository. It allows browsing of the full tree, with configurable access controls. It will display the revision history of a file, as well as produce diffs between revisions and allow downloading the whole file, whatever revision you choose. installed-size: 67 Package: dhcp-beta Version: 2.0b1pl6-0.4 Maintainer: Rich Sahlender Depends: libc6 Conflicts: dhcpd,dhcp,dhcp-relay-beta Provides: dhcpd,dhcp Replaces: dhcpd,dhcp Architecture: i386 Filename: dists/slink/updates/binary-i386/dhcp-beta_2.0b1pl6-0.4_i386.deb Size: 82120 MD5sum: dcd16de60fb440d49937b76db3c512b9 Description: DHCP server for automatic IP address assignment DHCP is a protocol like BOOTP (actually dhcpd includes much of the functionality of BOOTPD!). It assigns IP addresses to clients based on lease times. DHCP is used extensively by Microsoft and more recently also by Apple. It is probably essential in any multi-platform environment. . Multiple Ethernet Interfaces are supported by this DHCP package. You need to run Linux 2.0.32 or later or 2.1.82 or later. installed-size: 252 Package: dhcp-client-beta Version: 2.0b1pl6-0.4 Priority: optional Section: net Maintainer: Rich Sahlender Depends: libc6 Replaces: dhcpd Architecture: i386 Filename: dists/slink/updates/binary-i386/dhcp-client-beta_2.0b1pl6-0.4_i386.deb Size: 69006 MD5sum: c3c5fdbdfe28ed7ebfe4acdf793d2b32 Description: DHCP Client This is a split off from the dhcp package and contains the DHCP client tools. The package is untested and important scripts have not been customized. Please use the dhcpcd package instead until this package and the upstream software matures. . Documentation (apart from manpages) can be found in the dhcp-beta package. source: dhcp-beta installed-size: 196 Package: dhcp-relay-beta Version: 2.0b1pl6-0.4 Priority: optional Section: net Maintainer: Rich Sahlender Depends: libc6,ed Conflicts: dhcp-beta Replaces: dhcpd Architecture: i386 Filename: dists/slink/updates/binary-i386/dhcp-relay-beta_2.0b1pl6-0.4_i386.deb Size: 24482 MD5sum: 48f4e09491bf4ecfd8ca041ec5630191 Description: DHCP Relay Installing this package will make the machine it is installed on to a dhcp relay. You need to have a DHCP or BOOTP server reachable in order to use the relay. . Documentation (apart from manpages) can be found in the dhcp-beta package. This package needs Linux 2.0.32 or later or 2.1.82 or later. source: dhcp-beta installed-size: 104 Package: dnsutils Version: 1:8.2.2p5-0slink1 Priority: standard Section: net Maintainer: Bdale Garbee Depends: libc6 Conflicts: netstd (<<2.00) Architecture: i386 Filename: dists/slink/updates/binary-i386/dnsutils_8.2.2p5-0slink1_i386.deb Size: 274162 MD5sum: ce8a20f23ec3246cab484776652a18a4 Description: Utilities for querying the DNS This package includes the "nslookup", "dig", and "host" programs for querying information from the Domain Name System (DNS). It also includes several short aliases (mx, ns, soa, zone, aaaa) for querying specific information. source: bind installed-size: 2177 Package: dump Version: 0.4b9-0slink1 Priority: optional Section: admin Maintainer: Bdale Garbee Depends: libc6, libcomerr2, libe2p2, libext2fs2 Architecture: i386 Filename: dists/slink/updates/binary-i386/dump_0.4b9-0slink1_i386.deb Size: 75406 MD5sum: 959fcc1e72a8871d76d1b5bd2aeb7ce3 Description: 4.4bsd dump and restore for ext2 filesystems Dump examines files on a filesystem and determines which files need to be backed up. These files are copied to the given disk, tape or other storage medium for safe keeping. . The restore command performs the inverse function of dump. A full backup of a file system may be restored and subsequent incremental backups layered on top of it. Single files and directory subtrees may be restored from full or partial backups. . This version of dump has problems with filesystems larger than 4G. installed-size: 161 Package: epic4 Version: pre2.003-0slink2 Priority: optional Section: net Maintainer: Joseph Carter Depends: libc6, ncurses3.4 Suggests: epic4-help, epic4-dbg Architecture: i386 Filename: dists/slink/updates/binary-i386/epic4_pre2.003-0slink2_i386.deb Size: 316386 MD5sum: de8dee999d738609a14ea698bff83b3a Description: epic irc client, version 4 epic4 is an irc client based on ircII. It is primarily suited to users who wish to write their own irc scripts or have irc scripts written by others. . Previous versions of epic were 100% compatible with ircII 2.8.2, though this is no longer the case. Instead we've taken a new direction and chosen to find places where compatibility with ircII is undesirable and fix them. No gratuitous incompatibilities have been added, though many new features have been. installed-size: 695 Package: epic4-dbg Version: pre2.003-0slink2 Priority: extra Section: net Maintainer: Joseph Carter Depends: epic4, libc6, ncurses3.4 Architecture: i386 Filename: dists/slink/updates/binary-i386/epic4-dbg_pre2.003-0slink2_i386.deb Size: 459638 MD5sum: 2abf5a40aab6fe335da43577dd8fc2df Description: epic irc client, version 4 - debug version This package conains binaries for epic4 and wserv which are unoptimized and unstripped. Important for finding bugs in the client but not needed for normal operation. source: epic4 installed-size: 1476 Package: htdig Version: 3.1.5-0.1 Priority: extra Section: web Maintainer: Gergely Madarasz Depends: libc6, libdb2 (>= 2.3.16), libstdc++2.9, zlib1g (>= 1:1.1.3), perl Recommends: httpd Suggests: catdoc | word2x, pstotext | gs, pstotext | xpdf | xpdf-i Architecture: i386 Filename: dists/slink/updates/binary-i386/htdig_3.1.5-0.1_i386.deb Size: 861636 MD5sum: d804fb006cde4f45c1c74d0c48f112d4 Description: WWW search system for an intranet or small internet The ht://Dig system is a complete world wide web indexing and searching system for a small domain or intranet. This system is not meant to replace the need for powerful internet-wide search systems like Lycos, Infoseek, Webcrawler and AltaVista. Instead it is meant to cover the search needs for a single company, campus, or even a particular sub section of a web site. . As opposed to some WAIS-based or web-server based search engines, ht://Dig can span several web servers at a site. The type of these different web servers doesn't matter as long as they understand the HTTP 1.0 protocol. . Features: * Intranet searching * It is free * Robot exclusion is supported * Boolean expression searching * Configurable search results * Fuzzy searching * Searching of HTML and text files * Keywords can be added to HTML documents * Email notification of expired documents * A Protected server can be indexed * Searches on subsections of the database * Full source code included * The depth of the search can be limited * Full support for the ISO-Latin-1 character set installed-size: 2401 Package: imap Version: 4.5-0slink3 Priority: standard Section: mail Maintainer: Jaldhar H. Vyas Depends: libc6 Recommends: smail | mail-transport-agent Suggests: pine | imap-client Conflicts: imapd,imap-4 Provides: imap-server Replaces: imapd,imap-4 Architecture: i386 Filename: dists/slink/updates/binary-i386/imap_4.5-0slink3_i386.deb Size: 319334 MD5sum: 7611d7ba5dbd50c25800c4a97bd4f067 Description: remote mail folder access server for Pine and others IMAP (the Interactive Mail Access Protocol) is a mechanism for accessing mail folders and the messages in them remotely, ie with your user mail program running on a different machine to the one where all the messages are stored. . This protocol for remote mail access is supported by Pine and by some DOS/Windows and Macintosh MUA's (Mail User Agents). . If you just want to use Pine to read your email on your Linux system you do not need this package. . If you do install imapd you will almost certainly want to install a Mail Transfer Agent such as Smail or Sendmail, as remote mail programs which use IMAP to access incoming and saved mail will usually want to send mail using SMTP, often to the same machine. . You will probably also want to install Pine or some other IMAP client so that you can test your IMAP server. installed-size: 616 Package: inewsinn Version: 1.7.2-4.1 Maintainer: Miquel van Smoorenburg Depends: libc6 Recommends: trn | news-reader Provides: inews Replaces: inn (<=1.4unoff4-1) Architecture: i386 Filename: dists/slink/updates/binary-i386/inewsinn_1.7.2-4.1_i386.deb Size: 36308 MD5sum: e8af9fe66b95da403230c2d4443cfe35 Description: NNTP client news injector, from InterNetNews (INN). `inews' is the program that newsreaders call when the user wishes to post an article; it does a few elementary checks and passes the article on to the news server for posting. . This version is the one from Rich Salz's InterNetNews news transport system (which is also available as a Debian package). source: inn installed-size: 84 Package: inn Version: 1.7.2-4.1 Maintainer: Miquel van Smoorenburg Depends: libc6, cron (>=3.0pl1-42), mail-transport-agent, time, inewsinn (>= 1.7.2-1), grep (>= 2.0-13) Recommends: trn | news-reader Suggests: innfeed, pgp Conflicts: inewsinn (<= 1.4unoff4-1), news-transport-system Provides: news-transport-system Replaces: inewsinn Architecture: i386 Filename: dists/slink/updates/binary-i386/inn_1.7.2-4.1_i386.deb Size: 669180 MD5sum: 7c63df29c5738ae27d12bcb3edd5535f Description: News transport system `InterNetNews' by the ISC and Rich Salz INN is Debian's preferred news transport system. . The news transport is the part of the system that stores the articles and the lists of which groups are available and so on, and provides those articles on request to users. It receives news (either posted locally or from a newsfeed site), files it, and passes it on to any downstream sites. Each article is kept for a period of time and then deleted (this is known as `expiry'). . By default Debian's INN will install in a fairly simple `local-only' configuration. . In order to make use of the services provided by INN you'll have to use a user-level newsreader program such as trn. The newsreader is the program that fetches articles from the server and shows them to the user, remembering which the user has seen so that they don't get shown again. It also provides the posting interface for the user. installed-size: 1339 Package: inn-dev Version: 1.7.2-4.1 Maintainer: Miquel van Smoorenburg Architecture: i386 Filename: dists/slink/updates/binary-i386/inn-dev_1.7.2-4.1_i386.deb Size: 45230 MD5sum: 46d80892430881d7c6c457a1432b4c31 Description: The libinn.a library and manpages. You will only need this if you are going to compile news-transport programs that require the functions in libinn.a. source: inn installed-size: 116 Package: ipopd Version: 4.5-0slink3 Priority: standard Section: mail Maintainer: Jaldhar H. Vyas Depends: libc6 Conflicts: imap (<< 4.4-1) Architecture: i386 Filename: dists/slink/updates/binary-i386/ipopd_4.5-0slink3_i386.deb Size: 576960 MD5sum: 1cf0f724d484a144dc45453a9f02bd11 Description: POP2 and POP3 servers from UW This package contains the POP2 and POP3 servers which were formerly part of the University of Washington IMAP package. source: imap installed-size: 1060 Package: isdnutils Version: 1:3.0-12slink13 Maintainer: Paul Slootman Depends: libc6, libgdbmg1, ncurses3.4, tcl8.0 (>=8.0.4), xlib6g (>= 3.3-5), xlib6g (>= 3.3.2.3a-2), makedev (>= 2.3.1-10) | makedev (<< 2.3.1) Recommends: ppp, sox, suidmanager, doc-base Suggests: mgetty Replaces: vbox, isdnlog, ipppd, xisdnutils Architecture: i386 Filename: dists/slink/updates/binary-i386/isdnutils_3.0-12slink13_i386.deb Size: 1176510 MD5sum: 6550f5ee476a0c8056acf19f5a1e41fb Description: ISDN utilities This package includes all the utilities to get an ISDN system up and running. . This package works best with a 2.0.36 kernel (or higher). installed-size: 2456 Package: libc6 Version: 2.0.7.19981211-6.3 Priority: required Section: base Maintainer: Joel Klecker and others Pre-Depends: ldso (>= 1.8.10-1) Recommends: timezones, locales Suggests: glibc-doc Conflicts: libc5 (<< 5.4.33-7), libpthread0 (<< 0.7-10), libstdc++2.8 (= 2.90.29-1), libstdc++2.9 (<< 2.91.59-2), libc6-doc Replaces: libc6-dev (<< 2.0.7v-1) Architecture: i386 Filename: dists/slink/updates/binary-i386/libc6_2.0.7.19981211-6.3_i386.deb Size: 583898 MD5sum: aa1e224108d653c9d7f5fdc8c62e51fb Description: GNU C Library: shared libraries Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library among others. source: glibc installed-size: 1474 Package: libc6-dbg Version: 2.0.7.19981211-6.3 Priority: extra Section: devel Maintainer: Joel Klecker and others Recommends: libc6 (= 2.0.7.19981211-6.3) Conflicts: libc-dbg Provides: libc-dbg Architecture: i386 Filename: dists/slink/updates/binary-i386/libc6-dbg_2.0.7.19981211-6.3_i386.deb Size: 1081772 MD5sum: 0642d23a5535c266b8ded9f5db1d0aa2 Description: GNU C Library: Debugging and Profiling libraries. Includes static libraries compiled with debugging and profiling info. source: glibc installed-size: 4452 Package: libc6-dev Version: 2.0.7.19981211-6.3 Priority: standard Section: devel Maintainer: Joel Klecker and others Depends: libc6 (= 2.0.7.19981211-6.3) Recommends: c-compiler Suggests: glibc-doc Conflicts: libc-dev, libdl1-dev, libdb1-dev, libgdbm1-dev, libpthread0-dev, gcc (<=2.7.2.3-1) Provides: libc-dev Replaces: ldso (<<1.9.0-0), man-db (<=2.3.10-41), gettext (<=0.10.26-1), ppp (<=2.2.0f-24), libgdbmg1-dev (<= 1.7.3-24) Architecture: i386 Filename: dists/slink/updates/binary-i386/libc6-dev_2.0.7.19981211-6.3_i386.deb Size: 1276642 MD5sum: 25a4ea99261834928afb208491ae3b23 Description: GNU C Library: Development libraries and header files. Contains the symlinks, headers, and object files needed to compile and link programs which use the standard C library. source: glibc installed-size: 6081 Package: libc6-pic Version: 2.0.7.19981211-6.3 Priority: extra Section: devel Maintainer: Joel Klecker and others Recommends: libc6 (= 2.0.7.19981211-6.3) Conflicts: libc-pic Provides: libc-pic Architecture: i386 Filename: dists/slink/updates/binary-i386/libc6-pic_2.0.7.19981211-6.3_i386.deb Size: 376318 MD5sum: 999c8024a1afb6c972379cf92f81251a Description: GNU C Library: PIC archive library Contains an archive library (ar file) composed of individual shared objects. This is used for creating a library which is a smaller subset of the standard libc shared library. The reduced library is used on the Debian boot floppies. If you are not making your own set of Debian boot floppies using the `boot-floppies' package, you probably don't need this package. source: glibc installed-size: 1632 Package: libcanna1g Version: 3.5b2-24slink1 Priority: optional Section: libs Maintainer: ISHIKAWA Mutsumi Depends: libc6 Conflicts: canna (<< 3.5b2-23) Architecture: i386 Filename: dists/slink/updates/binary-i386/libcanna1g_3.5b2-24slink1_i386.deb Size: 376828 MD5sum: 546f7db3b425b90522628cd6e4bebd39 Description: Canna Runtime Library (Libc6). Canna is a Japanese input system available in Free Software. This package includes canna shared libraries. source: canna installed-size: 823 Package: libcanna1g-dev Version: 3.5b2-24slink1 Priority: extra Section: devel Maintainer: ISHIKAWA Mutsumi Depends: libcanna1g Conflicts: canna-dev, libcanna1-dev, canna (<< 3.5b2-23) Replaces: canna-dev Architecture: i386 Filename: dists/slink/updates/binary-i386/libcanna1g-dev_3.5b2-24slink1_i386.deb Size: 522912 MD5sum: c783e25125d3ec404307a48861125202 Description: Canna Static Library and Headers (Libc6). Canna is a Japanese input system available in Free Software. This package includes header and static libraries. source: canna installed-size: 1158 Package: locales Version: 2.0.7.19981211-6.3 Priority: standard Section: admin Maintainer: Joel Klecker and others Depends: libc6 Conflicts: localebin, wg15-locale Replaces: localebin, wg15-locale Architecture: i386 Filename: dists/slink/updates/binary-i386/locales_2.0.7.19981211-6.3_i386.deb Size: 1631536 MD5sum: ec5b14e87f3db3dbc0448c9d72276ef1 Description: GNU C Library: National Language (locale) data and utilities Utilities and machine-readable data files used by the C library for localization and internationalization support. source: glibc installed-size: 9752 Package: lpr Version: 1:0.48-0.slink1 Priority: standard Section: net Maintainer: Adam Klein Depends: libc6, netbase Suggests: magicfilter | apsfilter, gs Architecture: i386 Filename: dists/slink/updates/binary-i386/lpr_0.48-0.slink1_i386.deb Size: 83110 MD5sum: 386d1e35a9cab64cd960385a46dab6a1 Description: BSD lpr/lpd line printer spooling system This is the BSD printer spooler and associated utilities. You can use this for local and remote printers. . If you install magicfilter or apsfilter (along with gs), lpr will be able to automatically handle special file types (such as Postscript and PDF files). installed-size: 198 Package: lprng Version: 3.5.2-2 Maintainer: Craig Small Depends: libc6, ncurses3.4 Suggests: magicfilter, lprng-doc Conflicts: lpr, apsfilter (<<4.9.1-10) Provides: lpr Replaces: lpr Architecture: i386 Filename: dists/slink/updates/binary-i386/lprng_3.5.2-2_i386.deb Size: 688666 MD5sum: 3d55992ae81bdf333bd997f14260577a Description: lpr/lpd printer spooling system The LPRng software is an enhanced, extended, and portable version of the Berkeley LPR software (the standards UNIX printer spooler) You can use this for local and remote printers. installed-size: 1461 Package: lsof-2.0.35 Version: 4.37-3 Maintainer: Jim Mintha Depends: libc6 Conflicts: lsof, lsof-2.0.34 Replaces: lsof, lsof-2.0.34 Architecture: i386 Filename: dists/slink/updates/binary-i386/lsof-2.0.35_4.37-3.deb Size: 218468 MD5sum: e91000cbaaf9661a1fbb1a268fb5cf7b Description: List open files. Lsof is a Unix-specific diagnostic tool. It's name stands for LiSt Open Files, and it does just that. It lists information about any files that are open by processes current running on the system. Only work on kernel version 2.0.35 source: lsof installed-size: 295 Package: mailman Version: 1.0rc2-5 Priority: optional Section: web Maintainer: Gergely Madarasz Depends: libc6, python-base, python-misc, python-net, sendmail | mail-transport-agent, apache | httpd Recommends: cron (>= 3.0pl1-42), base-passwd (>= 1.3.0) Architecture: i386 Filename: dists/slink/updates/binary-i386/mailman_1.0rc2-5_i386.deb Size: 336250 MD5sum: d9b0f93458a41055ba1b39891e0a5ca5 Description: Powerful, web based list processor The GNU Mailing List Manager, which manages email discussion lists much like Majordomo and Smartmail. Unlike most similar products, Mailman gives each mailing list a web page, and allows users to subscribe, unsubscribe, etc. over the web. Even the list manager can administer his or her list entirely from the web. . Mailman also integrates most things people want to do with mailing lists, including archiving, mail <-> news gateways, and so on. It has all of the features you expect from such a product, plus integrated support for the web (including web based archiving), automated bounce handling and integrated spam prevention. . For more information see http://www.list.org/. installed-size: 1112 Package: mailx Version: 1:8.1.1-10.1.1slink.2 Priority: important Section: mail Maintainer: Loic Prylli Depends: libc6, smail | mail-transport-agent Provides: mail-reader Architecture: i386 Filename: dists/slink/updates/binary-i386/mailx_8.1.1-10.1.1slink.2_i386.deb Size: 99878 MD5sum: 1eb602833806b8a7a3d30a2515eadf72 Description: A simple mail user agent. mailx is the traditional command-line-mode mail user agent. Even if you don't use it it may be required by other programmes. installed-size: 147 Package: make Version: 3.77-5slink Maintainer: Manoj Srivastava Depends: libc6 Architecture: i386 Filename: dists/slink/updates/binary-i386/make_3.77-5slink_i386.deb Size: 249682 MD5sum: 78367bf9f0d309d732eaa57bc9008462 Description: The GNU version of the "make" utility. GNU Make is a program that determines which pieces of a large program need to be recompiled and issues the commands to recompile them, when necessary. More information about GNU Make can be found in the `make' Info page. installed-size: 322 Package: man-db Version: 2.3.10-69FIX.1 Maintainer: Fabrizio Polacco Depends: groff, libc6, libdb2 (>= 2.3.16) Suggests: bsdmainutils Conflicts: man, man-aeb Provides: man, man-browser Replaces: man, man-aeb, nlsutils Architecture: i386 Filename: dists/slink/updates/binary-i386/man-db_2.3.10-69FIX.1_i386.deb Size: 279984 MD5sum: 3141d2549a8873895dbc0fd0eead7324 Description: Display the on-line manual. This packages provides the man command, this utility is the primary way of examining the on-line help files (manual pages). Other utilities provided include the whatis and apropos commands for searching the manual page database; the manpath utility for determining the manual page search path and the maintenance utilities mandb, catman and zsoelim. This package uses the groff suit of programs to format and display the manual pages. installed-size: 599 Package: man2html Version: 1.5-18.1 Maintainer: Nicolás Lichtmaier Depends: libc6, httpd, debianutils (>= 1.6) Suggests: manpages, manpages-dev Architecture: i386 Filename: dists/slink/updates/binary-i386/man2html_1.5-18.1_i386.deb Size: 52692 MD5sum: 0a34bb26fbdae8aba227975fb7d36431 Description: Turns a web-browser and an httpd-server into a man pager. Point your webbrowser at http://your.site/cgi-bin/man2html and you got your manpages in the browser. . Features: * Fast C CGI program for man/BSD-mandoc to HTML conversion. * Works from the unformatted nroff/troff source. * Source may be compressed. * Does tbl tables (but not eqn equations). * Generates hypertext links to foobar(1), abc@host, and xyzzy.h files * CGI script for whatis-based alpha-indexes by section. * CGI script for name-only alpha-indexes by section. * CGI script for full text search (requires glimpse) * Front-end script to talk to a pre-launched netscape. installed-size: 127 Package: mirror Version: 2.9-2.1 Priority: optional Section: net Maintainer: Dirk Eddelbuettel Depends: netbase, perl Recommends: mailx Architecture: all Filename: dists/slink/updates/binary-i386/mirror_2.9-2.1_all.deb Size: 144698 MD5sum: d10e76994611915ba79aeee838fada7c Description: Perl program for keeping ftp archives up-to-date. Mirror uses the ftp protocol to duplicate a directory hierarchy between the machine it is run on and a remote host. It avoids copying files unnecessarily by comparing the file time-stamps and sizes before transferring. Amongst other things, it can optionally gzip and split files. It was written for use by archive maintainers but can be used by anyone wanting to transfer a lot of files via ftp. installed-size: 422 Package: mtr Version: 0.28-1 Priority: optional Section: net Maintainer: Robert Woodcock Depends: libc6, libgtk1 (>= 1:1.0.6-2), libncurses4, xlib6g (>= 3.3.2.3a-2) Architecture: i386 Filename: dists/slink/updates/binary-i386/mtr_0.28-1_i386.deb Size: 26632 MD5sum: b1f0fdfa4d213531bd613b69ebe62b14 Description: Full screen ncurses or X11 traceroute tool mtr combines the functionaly of the 'traceroute' and 'ping' programs in a single network diagnostic tool. As mtr starts, it investigates the network connection between the host mtr runs on and a user-specified destination host. After it determines the address of each network hop between the machines, it sends a sequence ICMP ECHO requests to each one to determine the quality of the link to each machine. As it does this, it prints running statistics about each machine. installed-size: 62 Package: netstd Version: 3.07-7slink.4 Maintainer: Herbert Xu Pre-Depends: netbase (>=3.00), libc6, libncurses4, libreadlineg2 (>= 2.1-12) Suggests: mail-transport-agent Replaces: pftp (<<0.7.6-1), wu-ftpd, wu-ftpd-academ Architecture: i386 Filename: dists/slink/updates/binary-i386/netstd_3.07-7slink.4_i386.deb Size: 399662 MD5sum: ea679edc14cf4d67001739043001332c Description: Networking binaries and daemons for Linux The netstd package provides you with the standard networking services (server and clients). This includes services like ftp, bootp, tftp, finger, rsh, rlogin and others. installed-size: 848 Package: nfs-server Version: 2.2beta37-1slink.1 Priority: standard Section: net Maintainer: Herbert Xu Depends: netbase, libc6 Replaces: netstd Architecture: i386 Filename: dists/slink/updates/binary-i386/nfs-server_2.2beta37-1slink.1_i386.deb Size: 115140 MD5sum: f5c4f2cc59101dc15bfc66530cb4d9e1 Description: User space NFS server. This package contains all necessary programs to make your Linux machine act as an NFS server, being an NFS daemon (rpc.nfsd), a mount daemon (rpc.mountd), optionally, the uid mapping daemon (rpc.ugidd), and the showmount utility. . Unlike other NFS daemons, the Linux nfsd runs entirely in user space. This makes it a tad slower than other NFS implementations, and also introduces some awkwardnesses in the semantics (for instance, moving a file to a different directory will render its file handle invalid). installed-size: 312 Package: nis Version: 3.5-2.1 Maintainer: Miquel van Smoorenburg Depends: libc6, libgdbmg1, netbase, make Conflicts: netstd (<=1.26) Architecture: i386 Filename: dists/slink/updates/binary-i386/nis_3.5-2.1_i386.deb Size: 164412 MD5sum: 8400a6695d570315106391cab7108347 Description: Clients and daemons for the Network Information Services (NIS). The nis package allows you to use the NIS services from a NIS server or to set up your own NIS server. NIS is mostly used to let several machines in a network share the same account information (eg the password file). NIS was formerly called Yellow Pages (YP). installed-size: 395 Package: nmh Version: 0.27-0.28-pre8-4 Priority: optional Section: mail Maintainer: Ruud de Rooij Depends: libc6, libncurses4 Recommends: mail-transport-agent, metamail Suggests: exmh Conflicts: mh Provides: mail-reader, mh Replaces: mh Architecture: i386 Filename: dists/slink/updates/binary-i386/nmh_0.27-0.28-pre8-4_i386.deb Size: 1698376 MD5sum: a5e06258dfdfc38069597047acdc7c5f Description: A set of electronic mail handling programs. This is the nmh mail user agent (reader/sender), a command line based mail reader that is powerful and extensible. nmh is an excellent choice for people who receive and process a lot of mail. . Unlike most mail user agents, nmh is not a single program, rather it is a set of programs that are run from the shell. This allows the user to utilize the full power of the Unix shell in coordination with nmh. Various front-ends are available, such as mh-e (an emacs mode), xmh, and exmh (X11 clients). . nmh was originally based on MH version 6.8.3, and is intended to be a (mostly) compatible drop-in replacement for MH. installed-size: 4516 Package: nvi Version: 1.79-9.1 Priority: important Section: editors Maintainer: Steve Greenland Depends: libc6, libncurses4 Architecture: i386 Filename: dists/slink/updates/binary-i386/nvi_1.79-9.1_i386.deb Size: 263636 MD5sum: aa056275853c9884c24dc6a421cde8a0 Description: 4.4BSD re-implementation of vi. Vi is the original screen based text editor for Unix systems. It is considered the standard text editor, and is available on almost all Unix systems. . Nvi is intended as a "bug-for-bug compatible" clone of the original BSD vi editor. As such, it doesn't have a lot of snazzy features as do some of the other vi clones such as elvis and vim. However, if all you want is vi, this is the one to get. installed-size: 508 Package: procmail Version: 3.13.1-1 Priority: standard Section: mail Maintainer: Santiago Vila Depends: libc6, debianutils (>= 1.6) Recommends: smail | sendmail | mail-transport-agent | fetchmail Architecture: i386 Filename: dists/slink/updates/binary-i386/procmail_3.13.1-1.deb Size: 123836 MD5sum: 468062e2c3182100879aa41f63e43631 Description: Versatile e-mail processor. Can be used to create mail-servers, mailing lists, sort your incoming mail into separate folders/files (real convenient when subscribing to one or more mailing lists or for prioritising your mail), preprocess your mail, start any programs upon mail arrival (e.g. to generate different chimes on your workstation for different types of mail) or selectively forward certain incoming mail automatically to someone. installed-size: 226 Package: proftpd Version: 1.2.0pre9-4 Priority: extra Section: net Maintainer: Johnie Ingram Depends: netbase (>= 2.0), libc6, perl | perl5 Conflicts: wu-ftpd, wu-ftpd-academ, ftp-server Provides: ftp-server Architecture: i386 Filename: dists/slink/updates/binary-i386/proftpd_1.2.0pre9-4_i386.deb Size: 305224 MD5sum: 26482b8817defe8eef78ff0b3f892a1d Description: Versatile, virtual-hosting FTP daemon A powerful replacement for wu-ftpd, this File Transfer Protocol daemon supports hidden directories, virtual hosts, and per-directory ".ftpaccess" files. It uses a single main configuration file, with a syntax similar to Apache. . Because of the advanced design, anonymous-FTP directories can have an arbitrary internal structure (bin, lib, etc, and special files are not needed). Advanced features like multiple password files and upload/download ratios are also supported. . More information can be found at http://www.proftpd.org/. installed-size: 614 Package: rsync Version: 2.3.1-0.slink.1 Maintainer: Philip Hands Depends: libc6 Suggests: ssh Architecture: i386 Filename: dists/slink/updates/binary-i386/rsync_2.3.1-0.slink.1_i386.deb Size: 91358 MD5sum: 1596e1746d1685a69972851b62eb66c1 Description: fast remote file copy program (like rcp) rsync is a program that allows files to be copied to and from remote machines in much the same way as rcp. It has many more options than rcp, and uses the rsync remote-update protocol to greatly speedup file transfers when the destination file already exists. . The rsync remote-update protocol allows rsync to transfer just the differences between two sets of files across the network link. installed-size: 177 Package: samba Version: 2.0.5a-1 Priority: optional Section: net Maintainer: Eloy A. Paris Depends: samba-common, libc6 Suggests: samba-doc Architecture: i386 Filename: dists/slink/updates/binary-i386/samba_2.0.5a-1_i386.deb Size: 1057962 MD5sum: 799ab1a56dd726548c33a130edfb9231 Description: A LanManager like file and printer server for Unix. The Samba software suite is a collection of programs that implements the SMB protocol for unix systems, allowing you to serve files and printers to Windows, NT, OS/2 and DOS clients. This protocol is sometimes also referred to as the LanManager or Netbios protocol. . This package contains all the components necessary to turn your Debian GNU/Linux box into a powerful file and printer server. . As of Samba 2.0.0, the Samba Debian packages consist of the following: . samba - A LanManager like file and printer server for Unix. samba-common - Samba common files used by both the server and the client. smbclient - A LanManager like simple client for Unix. swat - Samba Web Administration Tool samba-doc - Samba documentation. smbfsx - Mount and umount commands for the smbfs and kernels > 2.1.70. smbwrapper - A shared library that provides SMB client services installed-size: 2425 Package: samba-common Version: 2.0.5a-1 Priority: optional Section: net Maintainer: Eloy A. Paris Depends: libc6 Replaces: samba (<= 1.9.18p10-7) Architecture: i386 Filename: dists/slink/updates/binary-i386/samba-common_2.0.5a-1_i386.deb Size: 112172 MD5sum: eb8b9aa964912975db301f1e83919d36 Description: Samba common files used by both the server and the client. The Samba software suite is a collection of programs that implements the SMB protocol for unix systems, allowing you to serve files and printers to Windows, NT, OS/2 and DOS clients. This protocol is sometimes also referred to as the LanManager or Netbios protocol. . This package contains the common files that are used by both the server (provided in the samba package) and the client (provided in the smbclient package). source: samba installed-size: 265 Package: samba-doc Version: 2.0.5a-1 Priority: optional Section: net Maintainer: Eloy A. Paris Architecture: all Filename: dists/slink/updates/binary-i386/samba-doc_2.0.5a-1_all.deb Size: 423650 MD5sum: a9c1addcff72605f66a2334eef5e25ef Description: Samba documentation. The Samba software suite is a collection of programs that implements the SMB protocol for unix systems, allowing you to serve files and printers to Windows, NT, OS/2 and DOS clients. This protocol is sometimes also referred to as the LanManager or Netbios protocol. . This package contains all the documentation that comes in the original tarball. source: samba installed-size: 971 Package: screen Version: 3.7.4-9.1 Maintainer: Juan Cespedes Depends: libc6, libncurses4 Architecture: i386 Filename: dists/slink/updates/binary-i386/screen_3.7.4-9.1_i386.deb Size: 209048 MD5sum: a62f293aa7e0876cf49d51d3d216c09a Description: A screen manager with VT100/ANSI terminal emulation. screen is a terminal multiplexor that runs several separate "screens" on a single physical character-based terminal. Each virtual terminal emulates a DEC VT100 plus several ANSI X3.64 and ISO 2022 functions. Arbitrary keyboard input translation is also available. Sessions can be detached and resumed later on a different terminal. installed-size: 322 Package: sendmail Version: 8.9.3-3slink1.0.1 Priority: extra Section: mail Maintainer: Richard Nelson Depends: libc6, libdb2 (>= 2.3.16), netbase (>= 1.26-1), m4, procmail | deliver Recommends: mail-reader Conflicts: mail-transport-agent, smail Provides: mail-transport-agent Architecture: i386 Filename: dists/slink/updates/binary-i386/sendmail_8.9.3-3slink1.0.1_i386.deb Size: 949324 MD5sum: c3379317e496f1d85f520a670f29fb1a Description: A powerful mail transport agent. Sendmail is an alternative mail transport agent (MTA) for Debian. It is suitable for handling sophisticated mail configurations, although this means that its configuration can also be complex. . To deliver mail to local users, sendmail requires either the `procmail' or `deliver' package to be installed. installed-size: 1403 Package: sendmail-wide Version: 8.9.3+3.2W-3slink1 Priority: extra Section: mail Maintainer: Fumitoshi UKAI Depends: libc6, libdb2 (>= 2.3.16), sendmail (>= 8.9.3) Suggests: smtpfeed Architecture: i386 Filename: dists/slink/updates/binary-i386/sendmail-wide_8.9.3+3.2W-3slink1_i386.deb Size: 218854 MD5sum: 278719bd937146061c13653b87663640 Description: WIDE patch applied /usr/sbin/sendmail This package replaces /usr/sbin/sendmail with WIDE patch version, which provides some enhancement for the sendmail. Please apply this patch if you want to use "smtpfeed", which is an external SMTP mailer. WIDE patch includes followings patches: LOGWVERSION QUICK_RESPONSE - bounce mail not queued MULTI_MAILER - multiple mailer dispath in rulesetlikke: R$*<@dom>$* $#smtp$@dom$:$1<@dom>$2 $#uucp$@dom$:$1<@dom>$2 CF_ALIASING - alias in ruleset 5 like: R foo-a $# local $@ alias $: foo-a, foo-b DYNAMIC_TOBUF - tobuf[] dynamic allocation MAILER_PREF - mailer preferences CLIENT_SMTP_CONFIG - 3 parameters of client-side SMTP connection FQDN: FQDN used as a hostname with SMTP HELO SrcIPaddr: source IP address for client-side SMTP (12.34.56.78) SrcPort: source port number for client-side SMTP CTE8CHECK - Option CTE8BitChec=[corrent|reject] BOUNCE_REASON - Show reason of permanent fatal errors on each address OO_NULLSENDER - Set NULL sender envelope address for "owner-owner" MF_SEPARATE MASKED_ADDR - matching by masked IP address DEFINE_MAP - Enables "define" map. SPR_CON_CACHE - connection-caching control par mailer basis. FORWARDPROGCTL - privilege control on execution of programs via ~/.forward MAILER_TIMEOUTS - control message timeout per mailer basis. CHECK_WARNING - control whether a queue-warning should be sent or not For more information, see /usr/share/doc/sendmail-wide/00READ_ME.WIDE.gz . Note that original sendmail is diverted to /usr/sbin/sendmail-nowide. . WIDE is project name and stands for `Widely Integrated Distribution Environment'. Research goal of WIDE project is "to establish large-scale distributed computing environment". WIDE Project is working for providing the wide area communication infrastructure with our telecommunication technology and operating system technology, and trying hard to contribute to the people. http://www.wide.ad.jp/ installed-size: 405 Package: smbclient Version: 2.0.5a-1 Priority: optional Section: net Maintainer: Eloy A. Paris Depends: samba-common, libc6 Architecture: i386 Filename: dists/slink/updates/binary-i386/smbclient_2.0.5a-1_i386.deb Size: 416302 MD5sum: f5db7b12b67b24048d7ff915c9ec77ee Description: A LanManager like simple client for Unix. The Samba software suite is a collection of programs that implements the SMB protocol for unix systems, allowing you to serve files and printers to Windows, NT, OS/2 and DOS clients. This protocol is sometimes also referred to as the LanManager or Netbios protocol. . This package contains the client components of the Samba suite. source: samba installed-size: 981 Package: smbfs Version: 2.0.5a-1 Priority: optional Section: otherosfs Maintainer: Eloy A. Paris Depends: netbase (>= 2.02), samba-common, libc6 Conflicts: smbfsx Replaces: smbfsx Architecture: i386 Filename: dists/slink/updates/binary-i386/smbfs_2.0.5a-1_i386.deb Size: 312638 MD5sum: b6e90edf5db22cf3952a01f726cb7dd7 Description: Mount and umount commands for the smbfs (2.0.x and 2.1.x kernels) Smbfs is a filesystem which understands the SMB protocol. This is the protocol Windows for Workgroups, Windows NT or Lan Manager use to talk to each other. It was inspired by samba, the program by Andrew Tridgell that turns any unix site into a file server for DOS or Windows clients. . Starting with the Debian Samba packages version 2.0.4b-2, the old smbfs utilities for 2.0.x and the new smbfs utilities for 2.2.x kernels have been merged in a single package called smbfs. A wrapper script called smbmount.sh identifies the version of the kernel running and calls the correct binary. source: samba installed-size: 730 Package: smbwrapper Version: 2.0.5a-1 Priority: optional Section: otherosfs Maintainer: Eloy A. Paris Depends: libc6 Architecture: i386 Filename: dists/slink/updates/binary-i386/smbwrapper_2.0.5a-1_i386.deb Size: 202698 MD5sum: afabbae0e5ffdd03475a302586d75be5 Description: A shared library that provides SMB client services The Samba software suite is a collection of programs that implements the SMB protocol for unix systems, allowing you to serve files and printers to Windows, NT, OS/2 and DOS clients. This protocol is sometimes also referred to as the LanManager or Netbios protocol. . This package contains prelodable shared library that provides SMB client services for existing executables. Using this you can simulate a smb filesystem. source: samba installed-size: 491 Package: smtp-refuser Version: 1.0.1 Priority: optional Section: mail Maintainer: Debian QA Group Depends: libc6, netbase Architecture: i386 Filename: dists/slink/updates/binary-i386/smtp-refuser_1.0.1_i386.deb Size: 9330 MD5sum: 45a32aece01c4c3a5a329d6c857da94b Description: Simple spam-block with refusal message Using vix.com's Realtime Blackhole List (RBL) can cause legitimate mail to be blocked or bounced. To protect our users, we must bounce it with a meaningful message including the reason it was bounced and a local phone number. Because spam often has a bad envelope-from, (and because this is more efficient), we must bounce it with an error message during the SMTP transaction, rather than send bounce mail later, if the bounce is to have much chance of getting back to the sender. . This SMTP refuser is used along with "tcpd" or another TCP security daemon to bounce messages from the IP addresses of known spammers. The advantage of this over just blocking the connection is that the remote SMTP server will not retry, and a legitimate e-mail sender will get a polite message telling them why their mail was blocked and who to call to get around the blocking. installed-size: 32 Package: splitvt Version: 1.6.3-7.0slink1 Priority: optional Section: utils Maintainer: Joey Hess Depends: libc6 Architecture: i386 Filename: dists/slink/updates/binary-i386/splitvt_1.6.3-7.0slink1_i386.deb Size: 27646 MD5sum: 3531a6ec3009862cd4a3c671a0fa2204 Description: run two programs in a split screen A utility to split a vt100 compatible screen into two halves, upper and lower, and run a different program simultaneously in each half. installed-size: 64 Package: swat Version: 2.0.5a-1 Priority: optional Section: net Maintainer: Eloy A. Paris Depends: samba, libc6 Architecture: i386 Filename: dists/slink/updates/binary-i386/swat_2.0.5a-1_i386.deb Size: 319918 MD5sum: bd235e608944c7cd3cc7a17fceab0199 Description: Samba Web Administration Tool The Samba software suite is a collection of programs that implements the SMB protocol for unix systems, allowing you to serve files and printers to Windows, NT, OS/2 and DOS clients. This protocol is sometimes also referred to as the LanManager or Netbios protocol. . This package contains the components of the Samba suite that are needed for Web administration fo the Samba server. source: samba installed-size: 964 Package: sysklogd Version: 1.3-31.slink1 Maintainer: Martin Schulze Depends: libc6 Conflicts: syslogd Provides: syslogd Replaces: syslogd Architecture: i386 Filename: dists/slink/updates/binary-i386/sysklogd_1.3-31.slink1_i386.deb Size: 65922 MD5sum: 2d66ce993f7340742935f62a2d299233 Description: Kernel and system logging daemons This package implements two system log daemons. The syslogd daemon is an enhanced version of the standard Berkeley utility program. This daemon is responsible for providing logging of messages received from programs and facilities on the local host as well as from remote hosts. . The klogd daemon listens to kernel message sources and is responsible for prioritizing and processing operating system messages. The klogd daemon can run as a client of syslogd or optionally as a standalone program. Klogd can now be used to decode EIP addresses if it can determine a System.map file. installed-size: 125 Package: telnet Version: 0.12-4slink.1 Priority: standard Section: net Maintainer: Herbert Xu Depends: libc6, libncurses4, libstdc++2.9 Replaces: netstd Architecture: i386 Filename: dists/slink/updates/binary-i386/telnet_0.12-4slink.1_i386.deb Size: 50638 MD5sum: 36ca739c0c4b8d0148816c8307eb7cdf Description: The telnet client. The telnet command is used for interactive communication with another host using the TELNET protocol. source: netkit-telnet installed-size: 104 Package: telnetd Version: 0.12-4slink.1 Priority: standard Section: net Maintainer: Herbert Xu Depends: netbase, libc6, libncurses4 Replaces: netstd Architecture: i386 Filename: dists/slink/updates/binary-i386/telnetd_0.12-4slink.1_i386.deb Size: 25906 MD5sum: 94120dafd2afd6ff6bc55e575769acc1 Description: The telnet server. The in.telnetd program is a server which supports the DARPA telnet interactive communication protocol. source: netkit-telnet installed-size: 56 Package: termcap-compat Version: 1.1.1.1.0slink1 Priority: extra Section: misc Maintainer: Christian Hudon Depends: libc5 (>= 5.4.0-0) Conflicts: libtermcap Replaces: libtermcap Architecture: i386 Filename: dists/slink/updates/binary-i386/termcap-compat_1.1.1.1.0slink1_i386.deb Size: 192696 MD5sum: bc4dac98011f885596c39b3f87233b54 Description: Compatibility package for old termcap-based programs. The termcap-compat package provides the libtermcap.so.2 and /etc/termcap files which are required to run non-Debian, binary-only termcap-based programs. Since libc6-based programs are hopefully "modern" enough to be linked with ncurses (or slang), this package only provides a libc5-based libtermcap library. . You do not need to install this package to run Debian-packaged programs since Debian GNU/Linux uses terminfo and not termcap. You need this package if a program (that you cannot recompile) fails to run with the error message "...: can't load library 'libtermcap.so.2'" or complains about a missing /etc/termcap file. . The termcap-compat package isn't meant to be used to compile programs therefore it doesn't provide all the necesary files for compilation. If you want to compile a program that claims to need termcap, why not try ncurses's termcap emulation instead? It's as simple as linking with ncurses instead of libtermcap (i.e. replace the '-ltermcap' with '-lncurses' in the makefile). Ncurses' termcap emulation routines translate terminfo entries to termcap entries on the fly, so you don't even need an /etc/termcap file. . This package provides: libtermcap.so shared library, version 2.0.8 termcap database, version 9.13.25 installed-size: 566 Package: timezones Version: 2.0.7.19981211-6.3 Priority: required Section: base Maintainer: Joel Klecker and others Depends: libc6 Conflicts: timezone Replaces: timezone Architecture: i386 Filename: dists/slink/updates/binary-i386/timezones_2.0.7.19981211-6.3_i386.deb Size: 327864 MD5sum: 34f86dde61ac8b5725eff2cf891858cc Description: GNU C Library: Timezone data and utilities Utilities and data files used by the C library to handle time zones. source: glibc installed-size: 4913 Package: trn Version: 3.6-9.3.1 Maintainer: Jonathan K. Rabone Depends: libc6, libncurses4, inews Recommends: mail-transport-agent Suggests: ispell Provides: news-reader Architecture: i386 Filename: dists/slink/updates/binary-i386/trn_3.6-9.3.1_i386.deb Size: 187312 MD5sum: b14c9ba3eeef6a33e574c55e022c47a4 Description: Threaded USENET news reader, based on rn trn is the most widely-used newsreader on USENET - even to the point of being a de-facto standard. It has a powerful full screen text mode user interface, where most actions are available at the press of a single key. It is highly configurable. . This version of trn reads news from a news server via NNTP (the Network News Transfer Protocol). You must have a news server available - large sites usually provide a site-wide server. . If you install a news server on your system (either containing just local newsgroups or with a partial or full USENET feed) you can configure trn to access it. installed-size: 369 Package: userv Version: 1.0.1.0slink Maintainer: Ian Jackson Depends: libc6 Architecture: i386 Filename: dists/slink/updates/binary-i386/userv_1.0.1.0slink_i386.deb Size: 73012 MD5sum: ebf8d6cd431e94b6e731636d1d61440e Description: `user services' - program call across trust boundaries userv allows one program to invoke another when only limited trust exists between them. It is a tool which can be used to avoid having to give other system services root privilege, and which allows users to more securely have programs provide services to others. . userv can be useful as `glue' for system administrators; there are not many full-blown userv-using applications yet. installed-size: 203 Package: wu-ftpd-academ Version: 2.4.2.16-13.1 Priority: optional Section: net Maintainer: Heiko Schlittermann Depends: libc6, netbase (>= 2.0) Conflicts: wu-ftpd Replaces: wu-ftpd Architecture: i386 Filename: dists/slink/updates/binary-i386/wu-ftpd-academ_2.4.2.16-13.1_i386.deb Size: 125976 MD5sum: 9eace595dcb0ba68bb2ddd60ffbfa12f Description: A powerful replacement for the standard ftpd wu-ftpd is a replacement ftp server for Un*x systems. Besides supporting the ftp protocol defined in RFC 959, it adds the following features: o logging of transfers o logging of commands o on the fly compression and archiving o classification of users on type and location o per class limits o per directory upload permissions o restricted guest accounts o system wide and per directory messages. o directory alias o cdpath o filename filter o virtual host support (similar to the apache httpd server) . This release is maintained by Academ Consulting Services as a public service to the Internet. installed-size: 256 Package: xlockmore Version: 4.12-5 Priority: optional Section: x11 Maintainer: Herbert Xu Depends: libc6, xlib6g (>= 3.3.2.3a-2) Suggests: fortune Conflicts: xlockmore-gl Replaces: xlockmore-gl Architecture: i386 Filename: dists/slink/updates/binary-i386/xlockmore_4.12-5_i386.deb Size: 353794 MD5sum: ca34fd0732d82f2e4d176eb80f828cd8 Description: Lock X11 display until password is entered. xlock locks the X server till the user enters his/her password at the keyboard. While xlock is running, all new server connections are refused. The screen saver is disabled. The mouse cursor is turned off. The screen is blanked and a changing pattern is put on the screen. If a key or a mouse button is pressed then the user is prompted for the password of the user who started xlock. xlockmore extends the standard xlock program by adding many more modes that are highly configurable. . Note that under XFree86, the X11 implementation for Linux, Control- Alt-Backspace will defeat the locking mechanism and return your console back unless you put "DontZap" in your XF86Config file. 'xdm' returns to the login prompt. Control-Alt-F1 (among others) will defeat locking mechanism with virtual terminals, so make sure that you are not logged onto any virtual consoles. . This version is built without additional OpenGL/MesaGL and XPM modes. The companion package xlockmore-gl does contain them. installed-size: 816 Package: xlockmore-gl Version: 4.12-5 Priority: optional Section: x11 Maintainer: Herbert Xu Depends: libc6, xlib6g (>= 3.3.2.3a-2) Suggests: fortune Conflicts: xlockmore Provides: xlockmore Replaces: xlockmore Architecture: i386 Filename: dists/slink/updates/binary-i386/xlockmore-gl_4.12-5_i386.deb Size: 356468 MD5sum: 0d5c32ed8a834bb810ba421520f81dea Description: Lock X11 display until password is entered -- GL version WARNING: This package has security holes that can be exploited when NIS is enabled. So do not install it if you use NIS. . xlock locks the X server till the user enters his/her password at the keyboard. While xlock is running, all new server connections are refused. The screen saver is disabled. The mouse cursor is turned off. The screen is blanked and a changing pattern is put on the screen. If a key or a mouse button is pressed then the user is prompted for the password of the user who started xlock. xlockmore extends the standard xlock program by adding many more modes that are highly configurable. . Note that under XFree86, the X11 implementation for Linux, Control- Alt-Backspace will defeat the locking mechanism and return your console back unless you put "DontZap" in your XF86Config file. 'xdm' returns to the login prompt. Control-Alt-F1 (among others) will defeat locking mechanism with virtual terminals, so make sure that you are not logged onto any virtual consoles. . This version is built with additional OpenGL/MesaGL and XPM modes. The companion package xlockmore does not contain them. source: xlockmore installed-size: 824