#!/bin/sh

# This code is covered by the GNU General Public License (GPLv2 or higher)

# 1) Check the files are okay

if [ ! -e kernel ]; then
	echo "You have to download the kernel file from the debian-installer for QNAP."
	exit 1
fi

if [ ! -e initrd ]; then
	echo "You have to download the initrd file from the debian-installer for QNAP."
	exit 1
fi

ifilesize=$(ls -l initrd | awk '{print $5}')
# The ramdisk partition is 4 MB on the QNAP TS-109 and TS-209, and
# 9 MB on the QNAP TS-119, TS-219 and TS-219P.
if [ $ifilesize -ne 4194304 -a $ifilesize -ne 9437184 ]; then
	echo "The initrd file is corrupt"
	exit 1
fi

# 2) Ensure that the right installer files are used
qnap=$(getcfg System Model)
if [ -n "$qnap" ]; then
	case "$qnap" in
		"TS-109"* | "TS-209"*)
			qnap="TS-109/TS-209"
		;;
		"TS-409"*)
			qnap="TS-409"
		;;
		 "HS-210"* | "Q600" | "Q700" | "TS-110"* | "TS-112"* | "TS-119"* | "TS-210"* | "TS-212"* | "TS-219"*)
			qnap="TS-11x/TS-21x"
		;;
		"TS-120"* | "TS-121"* | "TS-220"* | "TS-221"*)
			qnap="TS-11x/TS-21x"
		;;
		"TS-410"* | "TS-412"* | "TS-419"*)
			qnap="TS-41x"
		;;
		"TS-420"* | "TS-421"*)
			qnap="TS-41x"
		;;
		*)
			echo "Unknown QNAP model $model: please report this to debian-arm@lists.debian.org"
			exit 1
		;;
	esac
	if [ -e model ]; then
		debian=$(cat model)
		if [ "$debian" != "$qnap" ]; then
			echo "Installation files don't match system model:"
			echo "  System model: $qnap"
			echo "  Installation files: $debian"
			echo "Please download the correct installation files."
			exit 1
		fi
	fi
fi

# 3) Change the MAC address on Kirkwood-based QNAP devices
uboot_mac() {
	ubootcfg -b 0 -f /dev/mtdblock4 -o - | grep "^ethaddr=" | sed "s/^ethaddr=//"
}

valid_mac() {
	mac="$1"
	if [ -z "$mac" ]; then
		return 1
	fi
	if [ "$mac" = "00:00:00:00:05:09" ]; then
		return 1
	fi
	if [ -n "$(echo "$mac" | sed "s/^..:..:..:..:..:..$//")" ]; then
		return 1
	fi
	return 0
}

if [ $ifilesize -eq 9437184 ]; then
	if which iface_get_mac > /dev/null && valid_mac "$(iface_get_mac eth0)"; then
		eth0=$(iface_get_mac eth0)
	elif which get_mac > /dev/null && valid_mac "$(get_mac)"; then
		eth0=$(get_mac)
	fi
	if [ -z "$eth0" ]; then
		echo "Failed to obtain MAC address"
		exit 1
	fi
	if [ "$(uboot_mac)" != "$eth0" ]; then
		echo "Updating MAC address..."
		orig=$(ubootcfg -b 0 -f /dev/mtdblock4 -o - | grep -v "^eth" | cksum | cut -d " " -f 1)
		ubootcfg -b 0 -f /dev/mtdblock4 -o - | sed "s/^ethaddr=.*/ethaddr=$eth0/" > /tmp/debian.$$
		if which iface_get_mac > /dev/null && valid_mac "$(iface_get_mac eth1)"; then
			eth1=$(iface_get_mac eth1)
			if ! grep -q "^eth1addr=" /tmp/debian.$$ ; then
				echo "eth1addr=$eth1" >> /tmp/debian.$$
			fi
		fi
		conf=$(grep -v "^eth" /tmp/debian.$$ | cksum | cut -d " " -f 1)
		if [ "$orig" != "$conf" -o "`cat /tmp/debian.$$`" == "" ]; then
			echo "Failed to generate new u-boot configuration."
			rm -f /tmp/debian.$$
			exit 1
		fi
		ubootcfg -b 0 -f /dev/mtdblock4 -i /tmp/debian.$$
		if [ "$?" != 0 ]; then
			echo "Error writing new configuration to flash.  Please check if your"
			echo "configuration looks correct with:"
			echo "    ubootcfg -b 0 -f /dev/mtdblock4 -o -"
			rm -f /tmp/debian.$$
			exit 1
		fi
		rm -f /tmp/debian.$$
	fi
	echo "Your MAC address is $(uboot_mac)"
	
fi

# 4) Copy uLinux.conf in case it's not there so we can identify the QNAP model
path=/tmp/nasconfig_tmp
mkdir -p $path
if mount -o rw -t ext2 /dev/mtdblock5 $path; then
	if [ ! -e $path/uLinux.conf ]; then
		cp /etc/config/uLinux.conf $path
	fi
	umount $path
fi
rmdir $path

# 5) Finally, write the installer to flash
printf "Writing debian-installer to flash... "
cat kernel > /dev/mtdblock1
cat initrd > /dev/mtdblock2
echo "done."
echo "Please reboot your QNAP device."